Mexborough Engine Shed
   HOME

TheInfoList



OR:

Mexborough engine shed was an
engine shed The motive power depot (MPD) or locomotive depot, or traction maintenance depot (TMD), is the place where locomotives are usually housed, repaired and maintained when not being used. They were originally known as "running sheds", "engine shed ...
in Swinton, in
South Yorkshire South Yorkshire is a ceremonial and metropolitan county in the Yorkshire and Humber Region of England. The county has four council areas which are the cities of Doncaster and Sheffield as well as the boroughs of Barnsley and Rotherham. In N ...
,
England England is a country that is part of the United Kingdom. It shares land borders with Wales to its west and Scotland to its north. The Irish Sea lies northwest and the Celtic Sea to the southwest. It is separated from continental Europe b ...
. It was built by the
Great Central Railway The Great Central Railway in England was formed when the Manchester, Sheffield and Lincolnshire Railway changed its name in 1897, anticipating the opening in 1899 of its London Extension. On 1 January 1923, the company was grouped into the ...
and opened in 1875. The shed was built slightly to the west of the current Mexborough station on land between the River Don and the
River Don Navigation The River Don Navigation was the result of early efforts to make the River Don in South Yorkshire, England, navigable between Fishlake and Sheffield. The Dutch engineer Cornelius Vermuyden had re-routed the mouth of the river in 1626, to impr ...
. It had 15 dead end roads, and could handle about 150 steam
locomotives A locomotive or engine is a rail transport vehicle that provides the motive power for a train. If a locomotive is capable of carrying a payload, it is usually rather referred to as a multiple unit, motor coach, railcar or power car; the u ...
, mainly for use on freight trains. The
London and North Eastern Railway The London and North Eastern Railway (LNER) was the second largest (after LMS) of the " Big Four" railway companies created by the Railways Act 1921 in Britain. It operated from 1 January 1923 until nationalisation on 1 January 1948. At th ...
operated the shed from 1923. In 1948, on the formation of
British Railways British Railways (BR), which from 1965 traded as British Rail, was a state-owned company that operated most of the overground rail transport in Great Britain from 1948 to 1997. It was formed from the nationalisation of the Big Four British rai ...
Eastern Region, Mexborough bore the shed code 36B, then 41F from 1958. It closed in February 1964. Most of the locomotives stabled at Mexborough were used for hauling coal trains. The coal originated from the many collieries in the South Yorkshire coalfield and wagons of coal were despatched to locations all over the country. However, the main destinations were the industries and power stations in Lancashire. With the opening of the
Wath marshalling yard Wath marshalling yard, also known as Wath concentration yard (), was a large railway marshalling yard specifically designed for the concentration of coal traffic. It was set at the heart of the South Yorkshire Coalfield, at Wath-upon-Dearne, ap ...
in 1907, Mexborough supplied locomotives for collecting wagons from the collieries, for re-marshalling of the wagons at Wath and for hauling coal trains across the steeply-graded " Woodhead" route across the Pennines into Lancashire. In the 1920s, the depot was the stabling point for what was then the most powerful locomotive in the UK, the London & North Eastern Railway's Class U1
Garratt A Garratt (often referred to as a Beyer Garratt) is a type of steam locomotive invented by British engineer Herbert William Garratt that is articulated into three parts. Its boiler, firebox, and cab are mounted on a centre frame or "bridge ...
. It was used for banking heavy coal trains up the Worsborough incline on the Woodhead route. In 1942 during the Second World War, three former Great Eastern Railway LNER J15 locomotives were drafted into to assist with coal traffic. In the 1950s, the route from Wath to Manchester was electrified. Consequently, the demand for the steam locomotives from the Mexborough depot reduced. The electric locomotives were stabled at
Wath Wath may refer to: Places in England * Wath, Cumbria, a U.K. location * Wath (near Ripon), a village in Harrogate district, North Yorkshire * Wath, Ryedale, a village in North Yorkshire * Wath-in-Nidderdale, a village near Pateley Bridge in Har ...
rather than Mexborough. Even the steam shunting engines for the marshalling work at Wath yard were replaced by diesel shunters in 1957. The use of steam locomotives for collecting coal from local collieries was also phased out and the depot closed in 1964. The site of Mexborough depot is now occupied by units in an industrial estate off of Meadow Way in Swinton. In its heyday, the depot had its own football team, Mexborough Locomotive Works F.C.


Locomotives

On 1 January 1923 the following classes of locomotive were allocated to Mexborough. In 1950, locomotive classes allocated to Mexborough included: *
LNER Thompson Class B1 The London and North Eastern Railway (LNER) Thompson Class B1 is a class of steam locomotive designed by Edward Thompson for medium mixed traffic work. Overview It was the LNER's equivalent to the highly successful GWR Hall Class and t ...
4-6-0 A 4-6-0 steam locomotive, under the Whyte notation for the classification of steam locomotives by wheel arrangement, has four leading wheels on two axles in a leading bogie and six powered and coupled driving wheels on three axles with the abse ...
*
LNER Class O2 The Great Northern Railway (Great Britain), Great Northern Railway (GNR) Class O2 was a class of three-cylinder 2-8-0 steam locomotives designed by Nigel Gresley for freight work and built by the GNR from 1921. Further examples were built by the ...
2-8-0 Under the Whyte notation for the classification of steam locomotives, represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles, and no trailing wheels. ...
*
LNER Class J11 The GCR Class 9J (LNER Class J11) was a class of 174 0-6-0 steam locomotives designed by John G. Robinson for freight work on the Great Central Railway The Great Central Railway in England was formed when the Manchester, Sheffield and ...
0-6-0 Under the Whyte notation for the classification of steam locomotives, represents the wheel arrangement of no leading wheels, six powered and coupled driving wheels on three axles and no trailing wheels. This was the most common wheel arrangemen ...
*
LNER Class J50 The Great Northern Railway Class J23 was a class of steam locomotive. They had long side tanks that came to the front of the smokebox, which sloped forwards to improve visibility and had a recess cut in to aid maintenance. Forty were built by t ...
0-6-0 Under the Whyte notation for the classification of steam locomotives, represents the wheel arrangement of no leading wheels, six powered and coupled driving wheels on three axles and no trailing wheels. This was the most common wheel arrangemen ...
T * LNER Class N5
0-6-2 Under the Whyte notation for the classification of steam locomotives, represents the wheel arrangement of no leading wheels, six powered and coupled driving wheels on three axles and two trailing wheels on one axle. The type is sometimes known a ...
T *
WD Austerity 2-8-0 The War Department (WD) "Austerity" 2-8-0 is a type of heavy freight steam locomotive that was introduced in 1943 for war service. A total of 935 were built, making this one of the most-produced classes of British steam locomotive. They were nic ...


References

;Notes ;Bibliography * {{coord, 53.4914, -1.2894, type:landmark_region:GB-DNC, display=title Railway depots in Yorkshire Mexborough